CEPLATTYN 300
Primer for large Open Gears and for the lubrication of toothed racks and sliding surfaces
Performance Features
- temperature range of lubricant film: -30 / +250 °C
- dry film up to +500 °C
- excellent adhesion
- outstanding protection against wear
- protects against corrosion
- forms a solid lubricant film under pressure
- forms a "dry" lubricating film, which repels dust
- water-resistant
Description
CEPLATTYN 300 is a high-graphite adhesive lubricant based on a selected base oil and contains EP additives and tackiness improvers. CEPLATTYN 300 is free of bitumen, heavy metals and solvents.In combination with CEPLATTYN RN and CEPLATTYN KG 10 HMF, CEPLATTYN 300 represents the FUCHS LUBRITECH multiphase system.
Field of application
CEPLATTYN 300 is recommended as primer for large Open Gears, gear racks and sliding surfaces. It is also used as an assembly paste for screws/bolts and pins. It is also suitable for wire rope lubrication and preservation as well as in steel hydraulics construction for chains, sliding surfaces, and gear tooth systems.
Method of application
CEPLATTYN 300 is applied manually on clean surfaces. Do not use in centralised lubrication systems!
Note
CEPLATTYN 300 is approved for undergrund mining by the Arnsberg District Authority, Dortmund, approval reference number: 84.12.22.63-2-1. Also available in aerosol cans as CEPLATTYN 300 SPRAY (German Railway material number DB Mat.-Nr. 00106169).
Technical Data: CEPLATTYN 300
| Characteristics | Value | Unit | Test Method |
|---|---|---|---|
| Colour | black | - | - |
| Temperature-constancy of lubricant film | 30 / +250 | ° C | LLS 134 |
| Dry lubricating film up to | +500 | ° C | LLS 134 |
| Base oil | min | - | - |
| Thickener | Al-X | - | - |
| Solid lubricants | C | - | - |
| Base oil viscosity [40°C] | 1300 | mm²/s | DIN 51562-1 |
| NLGI grade | 1-2 | - | DIN 51818 |
| Dropping point | >200 | ° C | DIN ISO 2176 |
| Four Ball Test welding load | 6000/6500 | N | DIN 51350-4 |
| Almen-Wieland scuffing load | >18 | kN | LLS 060 |
| Tannert friction coefficient | 0,102 | - | LLS 063 |
| FAFNIR friction loss properties | very good | qual. rating | LLS 066 |
| Erichsen screw test [M10x60 Fv = 30 kN] | - | - | - |
| Thread friction value | 0,07 | - | - |
| Top friction value | 0,1 | - | - |
| HT screw test [M 12x60, 24 h, 70 Nm MA] | - | - | LLS 123 |
| Temperature | 350 | ° C | - |
| Loosening torque ML | 80 | Nm | - |
LLS = LUBRITECH Laboratory Specification
Typical for current production. Variations in these characteristics may occur.
As far as we know this information reflects the current state of knowledge and our research. It cannot, however, be taken as an assurance about the properties nor as a guarantee of the suitability of the product for the individual case in point. Before using our products the purchaser must, therefore, check their suitability and be satisfied that the output will be satisfactory. Our products undergo continuous improvement. We therefore retain the right to change our product program, the products, and their manufacturing processes as well as all details of our product information sheets at any time and without prior announcement, unless otherwise provided in customer-specific agreements. With the publication of this product information sheet, all previous editions cease to be valid.
We are specialized in developing products for extreme tribological problems in cooperation with end users. FUCHS LUBRITECH provides service and individual advice. Please contact us! E-Mail: info@fuchs-lubritech.de