CEPLATTYN KG 10 HMF
Sprayable adhesive lubricant for large open gears
Performance Features
- Temperature range for use: -10 / +140°C
- Extremely high pressure resistance
- High scuffing load capacity
- Excellent protection against wear
- Very good corrosion-preventive ability
- Reduces tribocorrosion
- Forms adhesive lubricating film even at increased operating temperatures
- Can be applied with all common spray lubrication systems
- Good resistance to water
- Free from heavy metals, chlorine and solvents
Description
CEPLATTYN KG 10 HMF is based on a high-quality base oil, thickened with aluminium complex soap. The product contains colloidal graphite of the highest purity and fineness and in addition a carefully determined additive package, which is chlorine free and contains no heavy metals, together with adhesive additives. Together with CEPLATTYN 300 and CEPLATTYN RN, CEPLATTYN KG 10 HMF forms one of LUBRITECH’s matched multiphase lubrication systems.
Field of application
CEPLATTYN KG 10 HMF is used on the gear rim drives of tube mills, rotary kilns, dryers and crushers, which are to be found, i.a., in the raw materials industry or the power station sector. In addition CEPLATTYN KG 10 HMF is suitable for the lubrication of chains and heavily loaded sliding guides in rough operating conditions, e.g. in the mining industry.
Method of application
CEPLATTYN KG 10 HMF is handled using standard spray lubrication systems.
Note
CEPLATTYN KG 10 HMF is approved from well known machine- and equipment manufacturers.
Technical Data: CEPLATTYN KG 10 HMF
| Characteristics | Value | Unit | Test Method |
|---|---|---|---|
| Reference | OGPF0-00N-10 | - | DIN 51502 |
| Colour | black | - | - |
| Temperature range | -10 / +140 | ° C | LLS 134 |
| Temperature range (dry film) | 500 | ° C | LLS 134 |
| Base oil | min | - | - |
| Thickener | Al-X | - | - |
| Solid lubricants | C | - | - |
| Base oil viscosity [40°C] | 500 | mm²/s | DIN 51562-1 |
| NLGI grade | 0-00 | - | DIN 51818 |
| Dropping point | > 180 | ° C | DIN ISO 2176 |
| Four Ball Test welding load | 6500/7000 | N | DIN 51350-4 |
| TIMKEN OK-load | 45 | lbs | ASTM D 2509 |
| FZG A/2.8/50 - damage load step | >12 | - | DIN ISO 14635-3 |
| Specific wear | <0,2 | mg/kWh | DIN 51354 |
LLS = LUBRITECH Laboratory Specification
Typical for current production. Variations in these characteristics may occur.
As far as we know this information reflects the current state of knowledge and our research. It cannot, however, be taken as an assurance about the properties nor as a guarantee of the suitability of the product for the individual case in point. Before using our products the purchaser must, therefore, check their suitability and be satisfied that the output will be satisfactory. Our products undergo continuous improvement. We therefore retain the right to change our product program, the products, and their manufacturing processes as well as all details of our product information sheets at any time and without prior announcement, unless otherwise provided in customer-specific agreements. With the publication of this product information sheet, all previous editions cease to be valid.
We are specialized in developing products for extreme tribological problems in cooperation with end users. FUCHS LUBRITECH provides service and individual advice. Please contact us! E-Mail: info@fuchs-lubritech.de